The DGR0803 dual-mode multi-channel switch adopts high-precision switching units combined with a rapid control module, enabling precise and high-speed channel switching control. This instrument features 2-wire and 4-wire system inputs, along with 8/16/24-channel outputs, making it the most suitable device for building multi-channel test systems.
PDF 617K
After a command is issued, the switching module action time is within 2ms, and the reset time is within 1ms.
Switching times are not less than 10 million.
Supports I/O signal control or RS232 communication control to meet the control needs of various customer systems.
Precise calculation of internal circuit impedance and multi-faceted anti-interference measures.
Comes standard with a DC24V power adapter for power supply, the maximum operating current does not exceed 1A, and the power supply has a reverse connection protection function, which can effectively protect the switching system.
| Parameters | Description |
| Number of Channels | 8/16/24 (Optional) |
| Maximum Signal Level | 60 V DC or 60 Vpeak AC waveform, 0.8 A switching, 1500 mW |
| Contact Life | >107 Maximum Life |
| Contact Resistance | <2 Ω |
| Contact Voltage | <60 μV per contact pair |
| Bias Current | <1000 pA |
| Isolation between any two terminals | >100 MΩ, <100 pF |
| Isolation between any terminal and ground | >100 MΩ, <200 pF |
| Crosstalk (1 MHz, 50 Ω Load) | <-25 dB |
| Common Mode Voltage | 60 VDC or 60 Vpeak AC waveform between any terminal and chassis |
| Input Mode | Resistance Mode (4-pole input) / Voltage Mode (2-pole input) |
| Drive Time | <2 ms |
Version: 2025
