The SL2000 is a high-speed modular data acquisition system that combines the functionality of an isolated oscilloscope with the flexibility of high-speed DAQ, making it ideal for design verification, automated test equipment (ATE) systems, and operational testing.
The SL2000 uses the same plug-in modules as the DL950 ScopeCorder, providing exceptional versatility for mixed-signal measurements. A single unit can simultaneously capture multiple types of signals, including high voltage, in-vehicle communication buses, and NVH (Noise, Vibration, and Harshness) inputs such as vibration, strain, and temperature.
PDF 8.69MB
Isolated input of 1000 V, up to 7000 V when used with a differential probe
Maximum sampling rate of 200 MS/s
Maximum storage depth of 8 Gpoints
10 Gbps PC stream transmission
Real-time motor d-q analysis and power analysis
| Parameters | SL2000 | |
|---|---|---|
| Number of Slots | 8 | |
| Maximum Number of Analog Channels | 32 (4-channel module × 8) 128 (16-channel module × 8) | |
| Maximum Number of Connected Units | 5 | |
| Maximum Sampling Rate | 200 MS/s | |
| Multi-Sampling | ✓ Per Channel | |
| ADC Resolution | 12/14/16 Bits | |
| Maximum Input Voltage | 1000 V | |
| Maximum Recording Length | 4 G-Points | |
| PC Stream Transmission | ✓ (10 GbE, Ethernet, USB) | |
| Input Signals (Module Types) | Voltage/Current, Temperature, Acceleration, Strain, Pulse, Logic* CAN/CAN FD/LIN/SENT | |
| Included Software | 1 IS8002 Software License Included (when /SN option is not included) | |
Version: 202504
Version: 202504
Version: 202504
Version: 202504
