To achieve a low-carbon society, eliminate dependence on fossil fuels, and realize the United Nations' Sustainable Development Goals, the development of new renewable energy sources and energy-efficient technologies for transportation, household, and industrial appliances is urgently needed.
To minimize energy loss and optimize design efficiency, engineers require detailed insights into the electrical and mechanical behavior of products. The DL950 ScopeCorder captures and analyzes a wide range of electronic signals, physical sensor data, and serial bus communications. It uniquely combines high sampling rates with the ability to maintain long-term recording while simultaneously examining fine details.
The DL950 will become one of the most valuable instruments in any user's laboratory.
PDF 3.6m
200MS/s high-speed sampling rate
8Gpoints large memory
Long-term recording to internal flash memory at 20MS/s
10Gbps Ethernet high-speed data transmission
Multi-unit synchronized operation with up to 160CH
With up to 8 Gpoints of memory and 20 seconds of continuous capture, no signal changes are missed even at 200 MS/s.
*Up to 4 Gpoints of memory can be allocated per channel.
| Sampling Rate | 1CH Used | 2CH Used | 4CH Used | 8CH Used | 16CH Used | 32CH Used |
|---|---|---|---|---|---|---|
| 200 MS/s | 20 s | 20 s | 10 s | 5 s | 2 s | 1 s |
| 100 MS/s | 40 s | 40 s | 20 s | 10 s | 5 s | 2 s |
| 50 MS/s | 1 m | 1 m | 40 s | 20 s | 10 s | 5 s |
| 20 MS/s | 3 m 20 s | 3 m 20 s | 1 m 40 s | 50 s | 20 s | 10 s |
| 10 MS/s | 5 m | 5 m | 3 m 20 s | 1 m 40 s | 50 s | 20 s |
| 1 MS/s | 1 h | 1 h | 30 m | 10 m | 5 m | 3 m 20 s |
The 512 GB internal SSD enables long-term recording at up to 2 MS/s. Additionally, dual-capture waveforms can be recorded, which is highly effective for in-vehicle durability testing and capturing rare spontaneous events.
| Sampling Rate | 1CH Used | 2CH Used | 4CH Used | 8CH Used | 16CH Used | 32CH Used |
|---|---|---|---|---|---|---|
| 2 MS/s | 5 h | — | — | — | — | — |
| 1 MS/s | 10 h | 10 h | — | — | — | — |
| 200 kS/s | 60 h | 60 h | 60 h | 40 h | 20 h | — |
| 100 kS/s | 5 days | 5 days | 5 days | 3 days | 40 h | 20 h |
| 10 kS/s | 50 days | 50 days | 50 days | 30 days | 10 days | 5 days |
| 1 kS/s | 50 days | 50 days | 50 days | 50 days | 50 days | 50 days |
Enables long-term recording at up to 20 MS/s, 100 times faster than previous models. Ideal for data capture in locations where a PC cannot be carried, such as in-vehicle or on-site testing. Flash memory is non-volatile, so captured data remains in the instrument even after power-off. Data can be transferred to a PC after testing.
| Sampling Rate | 1CH Used | 2CH Used | 4CH Used | 8CH Used | 16CH Used | 32CH Used |
|---|---|---|---|---|---|---|
| 20 MS/s | 10 m | 10 m | 10 m | 5 m | — | — |
| 10 MS/s | 30 m | 30 m | 30 m | 10 m | 5 m | — |
| 5 MS/s | 1 h | 1 h | 1 h | 30 m | 10 m | 5 m |
| 2 MS/s | 2 h | 2 h | 2 h | 1 h | 40 m | 10 m |
| 1 MS/s | 5 h | 5 h | 5 h | 2 h | 1 h | 30 m |
Deleting data recorded on flash memory does not erase each recorded data individually but deletes all data at once. When transferring recorded data to a PC, use IS8000 or resave the data in WDF format.
Version: 202504
Version: 202504
Version: 202504
Version: 202504
