Easily achieve the unified management of analog data and CAN data
A data logger with a 1ms sampling rate and up to 120 channels by adding direct-connection units. It adapts to a wide variety of scenarios, supporting free combination of 6 types of direct-connection units.
PDF 7.98MB
For models without wireless functionality, up to 120 channels can be achieved by adding direct-connection units (LR8450)
Capable of measuring output voltages from various sensors such as pressure sensors at a 1ms sampling rate
Can measure at a maximum sampling rate of 1ms after direct connection to strain gauges
Stable measurement even near high-voltage and high-frequency equipment such as inverters, significantly reducing the impact of interference
600-channel analog synchronous sampling measurement [V2.10 and above]
Achieves visualization of energy consumption through multi-point detection of current consumption
| Maximum number of connectable units | 4 direct-connection units |
|---|---|
| Connectable units (direct-connection units) | U8550, U8551, U8552, U8553, U8554, U8555 (U8555 is compatible with host version V2.00 and above), U8556 (U8556 is compatible with host version V2.20 and above) |
| Number of measurement channels | [Number of channels] 8ch (host common ground, non-insulated, dedicated settings for pulse/logic input of each channel) [Input type] No-voltage contact, open collector, voltage [Accumulation] 0~1000M pulses, resolution 1 pulse [Rotation speed] 0~5000/n (r/s), resolution 1/n (r/s), 0~300000/n (r/min), resolution 1/n (r/min), where n is the number of pulses per revolution, ranging from 1 to 1000 [Logic input] Records 1 or 0 at each recording interval |
| Recording interval | 1 ms※, 2 ms※, 5 ms※ (※: Only configurable when using 1 ms/S units), 10 ms~1 h, 22 settings, data update interval can be set for each unit |
| Data storage | SD memory card/USB flash drive optional (only HIOKI genuine accessories can ensure normal operation) |
| LAN interface | Compliant with 100BASE-TX/1000BASE-T, DHCP, DNS. Functions: Data collection via Logger Utility software/setting and recording control via condition settings and communication commands, FTP server/client, HTTP server, NTP client, NTP server time synchronization |
| USB interface | Compliant with USB2.0 ×2 (USB flash drive, keyboard, hub connection), ×1 (data collection/condition setting via Logger Utility, setting/recording control communication via communication commands, data transfer from SD memory card to PC) |
| SD card slot | Compliant with SD standard ×1 (compatible with SD/SDHC memory cards). Guaranteed operation: Z4001, Z4003 |
| Display | 7-inch TFT color LCD (WVGA 800×480 dots) |
| Functions | Real-time data saving to SD card/USB flash drive, numerical/waveform calculation, 8ch alarm output, 2-terminal voltage output (switchable between 5V/12V/24V) |
| Power supply | [AC adapter] Z1014 (AC100~240 V, 50/60 Hz), 95 VA Max. (including AC adapter), 28 VA Max. (host only) [Battery pack] Z1007 (2 can be installed)/Continuous usage time 4 h (reference value with 2 installed), 20 VA Max. [External power supply] DC 10~30 V, 28 VA Max. |
| Dimensions and weight | Without units installed: 272W × 145H × 43D mm, 1108 g (excluding battery) With 2 units installed: 272W × 198H × 63D mm With 4 units installed: 272W × 252H × 63D mm |
| Accessories | Quick measurement guide ×1, LOGGER Application Disk (quick measurement guide, detailed instruction manual, Logger Utility, Logger Utility instruction manual, communication command manual) ×1, USB cable ×1, AC adapter ×1 |
Version: 2025
